High Gloss Metal Poly Urethane Coating
350.00 - 450.00 INR/Liter
Product Details:
X
High Gloss Metal Poly Urethane Coating Price And Quantity
- 350.00 - 450.00 INR/Liter
- 20 Liter
High Gloss Metal Poly Urethane Coating Trade Information
- Kolkata
- Telegraphic Transfer (T/T) Cash in Advance (CID) Cheque Cash Advance (CA)
- 10000 Liter Per Month
- 1 Week
- Yes
- Contact us for information regarding our sample policy
- All India
- ISO 9001:2008
Product Description
High Gloss Metal Poly Urethane Coating is an anti-corrosive liquid chemical solvent which is used to provide a shield over different types of objects to protect them against environmental attacks. It consist of an isocyanate group which acts as a base material for the production of this chemical. The solvent has a good reactivity helps to provide a good bonding between the additives and other constituents present to provide a uniformity and high adhesion with the surface on which it is going to be applied. High Gloss Metal Poly Urethane Coating provides excellent finish and high gloss with a good resistance against abrasion.
Product Description:
Two component, air drying, acrylic aliphatic polyurethane coating.
Features :
- Excellent finish with high gloss.
- Excellent colour & gloss retension.
- Excellent outdoor durability.
- Tough, abrasion resistant coating with excellent flow and leveling charecterestics.
- Good resistance to chemicals and polluted environments.
Technical details
| Color | : Wide Range |
| Gloss | : High Gloss/ Matte |
| Volume solids | : Approx 50%. |
| Recommended DFT / coat | : 35 - 50 mµ |
| Theoretical covering capacity | : 13 to 15 m2/l @ 35mµ |
| Curing time at 30ºC | : Surface dry : 30 Mins. |
| : Hard dry : 16 hours | |
| : Full cure : 7 days | |
| Shelf life (cool & dry place) | : 12 months(min) |
| Flash point | : Base : < 28ºC |
| : Hardener : < 28ºC |
Surface Preparation & Substrate Condition
- Can be applied on epoxy primer, epoxy /polyurethane undercoat; surface must be dry & free from all surface contamination. Surface of aged epoxy coating should be sufficiently roughened prior to painting.
- Substrate temperature should be at least 3°C above dew point but not above 50°C.
- Stir the base and hardener separately to get an uniform mix, then add hardener slowly to the base slowly with constant stirring for quick homogenous mixing.
| Mixing ratio | Base : Hardener :: 4:1(v/v) |
| Induction time | 25 minutes |
| Pot life at 30° | 3 hours |
Application:
Brush
- Recommended thinner : Tufthin 9
- Volume of thinner : 0 - 10 %
Air spray
- Recommended thinner : Tufthin 9.
- Volume of thinner : 5 - 20 %
- Nozzle orifice : 1.5 - 3.0 mm
- Nozzle pressure : 0.3 - 0.4 MPas
Airless spray
- Recommended thinner : Tufthin 9
- Volume of thinner : 0 - 15 %
- Nozzle orifice : 0.41 - 0.48 mm
- Nozzle pressure : 20 - 24 MPas
Other Products in 'Poly Urethane Coating' category
WASSER POLYMER PVT LTD
GST : 19AABCW0927E1ZG
GST : 19AABCW0927E1ZG
- 66, Paik Para First Row, Kolkata - 700037, West Bengal, India
- Phone : View Number
- Mr Deepjyoti Chakroborty (Director)
- Mobile :View Number
- Send Inquiry
Send Inquiry
Send Inquiry
|
|
|
|
 |
WASSER POLYMER PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |
